1. When the cutting machine is working, it is necessary to concentrate on it, not only to keep a clear mind, but also to operate the power tool rationally. It is strictly forbidden to operate the cutting machine after being tired, drinking or taking stimulants or drugs.
2. The power line must be safe and reliable. Unauthorized pulling is strictly prohibited. Be careful not to cut off the power line. Before use, the performance of the equipment must be carefully checked to ensure that all parts are in good condition.
3. Wear suitable work clothes. Do not wear loose work clothes, let alone wear jewelry or long hair. It is strictly forbidden to operate while wearing gloves and unbuttoned cuffs.
4. The processed workpiece must be firmly clamped, and it is strictly forbidden to start cutting the workpiece without clamping it tightly.
5. It is strictly forbidden to grind the burrs of the workpiece on the surface of the grinding wheel to prevent the grinding wheel from breaking.
6. When cutting, the operator must deviate from the front of the grinding wheel and wear protective glasses.
7. It is strictly forbidden to use the damaged grinding wheel. When cutting, prevent sparks from splashing and keep away from flammable and explosive materials.
8. When clamping the workpiece, the clamping should be stable and firm. The protective cover must be installed correctly.
9. When replacing a new cutting blade or grinding wheel in the middle, do not use too much force on the lock nut to prevent the saw blade or grinding wheel from cracking and causing accidents.
10. It is necessary to firmly hold the handle of the cutting machine and cut vertically with even force, and the fixed end must be firm and reliable.
11. Do not try to cut small unclamped workpieces or profiles with severe edges.
12. To improve work efficiency. Before sawing single or multiple pieces together, be sure to do a good job of auxiliary clamping and positioning.
13. Powerful sawing operations are not allowed. Wait until the motor speed reaches full speed before cutting.
14. No one is allowed to stand behind the saw. When there is a power failure, rest or leave the work site, the power should be cut off immediately.
15. Never release either hand or lift arm from the saw or workpiece while the saw blade is not stopped.
16. Do not operate when the guard is not in place, and do not put your hands within 15 cm from the saw blade. It is not allowed to lean over or around the saw machine, and it is advisable to lean the body at an angle of 45 degrees during operation.
17. If there is an abnormal sound, stop the inspection immediately; before repairing or replacing accessories, you must cut off the power supply and wait for the saw blade to stop completely.
18. When using the cutting machine to work in a wet place, it must be carried out on an insulating pad or a dry wooden board. Safety protection measures must be taken when climbing high or using in explosion-proof and other hazardous areas.
19. If the equipment shakes or other faults occur, it should be stopped immediately for repairs. It is strictly forbidden to work while sick, taking stimulants or drinking, and it is strictly forbidden to wear gloves when operating. If it will cause dust during operation, wear a mask or face shield.
20. After processing, the power should be turned off, and the equipment and surrounding areas should be cleaned.